|
|
Post by El Loco on Jun 14, 2010 17:10:16 GMT
 Well the MJM team were hard at it last Friday getting the engine sorted for the forthcoming Bush Road Races. Needless to say it wasn't straight forward (I know, it never bloody is :  but we got there, sort of, in the end: Something's missing  ....... .......there it is Maybe if I shake it the missing bit will fall out?? Nah, lets strip it down and give it a polish.....  If Carlsberg built engines, they'd probably be....... And one for Snooker.....Yep! We're actually using the torque wrench................on the sump plug (well it's a start at least)!!!  Anyhow, we finally managed to get the engine back together before it got light on Saturday morning  and all looked rosey. Then Jack phoned me yesterday......................to be continued   ;D M. 
|
|
|
|
Post by marty on Jun 14, 2010 22:19:37 GMT
good pic's mate, I had a good night and it was good to see you with the cage off  Nice one mate ;D ;D ;D |
|
Phil
Administrator
Posts: 1,319
|
Post by Phil on Jun 14, 2010 22:55:19 GMT
Let's hope everything runs smooth at the next outing ;D
|
|
|
|
Post by El Loco on Jun 15, 2010 15:05:52 GMT
good pic's mate, I had a good night and it was good to see you with the cage off Nice one mate ;D ;D ;D Don't remember that being taken mate but there's always something nice about a pint in the hand and watching everyone else do the work...... ;D M. |
|
Phil
Administrator
Posts: 1,319
|
Post by Phil on Jun 15, 2010 19:37:40 GMT
good pic's mate, I had a good night and it was good to see you with the cage off Nice one mate ;D ;D ;D ...... ;D M. No change there then ;D |
|
|
|
Post by El Loco on Jun 15, 2010 20:06:16 GMT
I was in charge of quality control ya cheeky fecker! ;D M.
|
|
|
|
Post by marty on Jun 16, 2010 20:30:12 GMT
don't forget to read the fecking manual. Jack worked well that night with two supervisors looking on. ;D ;D ;D |
|
|
|
Post by El Loco on Aug 5, 2010 14:55:45 GMT
don't forget to read the fecking manual. Jack worked well that night with two supervisors looking on. ;D ;D ;D And don't forget that gaskets are there for a reason..........  ;D M. |
|
|
|
Post by El Loco on Aug 10, 2010 18:48:47 GMT
This might be handy to have in the future: ;D ;D M.
|
|
but we got there, sort of, in the end:
.......
and all looked rosey. Then Jack phoned me yesterday......................to be continued 
;D
